2026-11-09 · 4 min read
How to Make an Unpowered Cardboard Fit Mock-up for a Robot
Use paper footprints and cardboard blocks to check access around robot parts before drilling or ordering a chassis.
Represent the parts you already know
Draw each planned part’s footprint from a verified drawing and label it with the part reference. Fold cardboard blocks to approximate height. Keep uncertain dimensions marked rather than assigning a plausible size. Do not use the mock-up as an electrical or structural model.
Include the space to work on it
Place the blocks on a paper chassis. Mark screw access, plug removal and the path needed to lift a battery out when the robot is safely isolated. An assembly can fit on paper while leaving no room to remove a connector or reach a mounting point.
Test a maintenance task on paper
Imagine that a controller must be removed without taking off the sensor bracket. Lift the cardboard controller in the proposed direction and note the obstruction. Compare moving a bracket with changing the removal route; do not cut a real part until the dimensions and design are confirmed.
Record the unresolved fit questions
Photograph the labelled layout and list the exact drawings or samples still needed. Keep the mock-up away from powered equipment. Check the build guide for the wider build sequence; marketplace listings alone cannot confirm compatibility.
Can I power the cardboard version?
No. The mock-up is for checking geometry and access. Follow the approved design and supervised test procedure for any powered assembly.
Continue building
Follow the complete RoboSkies build journey from planning to a working robot.
Explore the build guideExplore the robot marketplace