2026-10-31 · 6 min read
How to Mark a Robot Test Zone Before Movement Testing
Set visible boundaries, entry controls and stopping conditions for a beginner robot movement test without treating floor markings as a complete safety system.
Read guide← Back to RoboSkies
RoboSkies Blog
Build knowledge before you build the robot
Clear explanations, buying guidance and practical lessons for robotics builders at every stage.
2026-10-30 · 6 min read
How to Move a Small Robot Safely Between Build and Test Areas
Prepare, isolate and carry a small robot between work areas without lifting it by wheels, wiring or unverified components.
Read guide2026-10-29 · 6 min read
How to Check a Robot Parts Order When It Arrives
Use a safe receiving checklist to match delivered robot parts to the order, record visible condition and quarantine concerns before assembly or powered testing.
Read guide2026-10-28 · 6 min read
How to Record Robot Battery Identity and Status Before Use
Create a practical battery identity and status record for a robot build without guessing chemistry, compatibility, charging settings or remaining service life.
Read guide2026-10-27 · 5 min read
How to Label Robot Wiring Before Troubleshooting
Create a traceable wiring-label system before troubleshooting so learners can identify connections without guessing or changing several things at once.
Read guide2026-10-26 · 5 min read
How to Reset a Robot Test Area After a Build Session
Close a robot-building session safely by isolating power, accounting for parts, recording changes and leaving the test area ready for the next authorised use.
Read guide2026-10-25 · 5 min read
How to Inspect Robot Chassis Fasteners After a Build Session
Create a safe post-session inspection for visible loosening, movement and damage without inventing torque values or hardware compatibility.
Read guide2026-10-24 · 5 min read
How to Check Robot Wheel Fastening Before a Movement Test
Use a simple pre-test inspection to record wheel, hub and axle fastening without guessing at torque or hardware compatibility.
Read guide2026-10-23 · 5 min read
How to Keep a Robot Build Change Log
Record what changed on a robot, why it changed and which checks must be repeated so observations stay tied to the correct build version.
Read guide2026-10-22 · 5 min read
How to Inspect Robot Connectors Before a Powered Test
Inspect robot connectors for identity, seating, strain and visible damage before an authorised powered test without assuming electrical compatibility.
Read guide2026-10-21 · 5 min read
How to Review a Robot's Centre of Gravity Before Movement Testing
Review where a beginner robot carries mass, how its support points relate to that mass and what to observe before controlled movement testing.
Read guide2026-10-20 · 5 min read
How to Read Brushed DC Motor Specifications Before a Robot Build
Read a brushed DC motor's voltage, no-load figures, stall information and mechanical details without treating headline values as tested robot performance.
Read guide2026-10-19 · 5 min read
How to Prepare Tools and Workspace for a Beginner Robot Build Session
Prepare a supervised robot assembly session by matching tools, parts, documentation and workspace to one approved task.
Read guide2026-10-18 · 5 min read
How to Write Requirements for a First Robot Project Before Choosing Parts
Define a first robot's purpose, operating boundaries and evidence needs before turning a shopping list into an unmanageable project.
Read guide2026-10-17 · 5 min read
How to Prepare a Robot Project Handover for Another Learner
Prepare a learner-to-learner robot handover that distinguishes the current build, tested behaviour, unresolved issues and supervised next steps.
Read guide2026-10-16 · 5 min read
Robot Simulation vs Physical Testing: What Beginners Should Verify
Use a robot simulation as limited evidence, then plan supervised physical verification of assumptions before real-world operation.
Read guide2026-10-15 · 5 min read
How to Compare Robot Sensor Readings Under Different Test Conditions
Plan repeatable sensor observations with controlled distance, surface, light and robot configuration before relying on a reading.
Read guide2026-10-14 · 5 min read
How to Keep a Spare-Parts Log for a Robot Build
Track replacement robot components by exact identity, compatibility evidence, storage condition and the build revision they support.
Read guide2026-10-14 · 5 min read
How to Compare Robot Marketplace Listings Before Choosing a Build
Compare robot listings by intended use, included parts, documentation, build status and unanswered technical questions before choosing.
Read guide2026-10-13 · 7 min read
How to Check Robot Motor Direction Before a Full Movement Test
Verify motor identity, intended rotation and control mapping with a restrained staged test before a beginner robot moves freely.
Read guide2026-10-12 · 7 min read
How to Inspect a Robot Caster Wheel Before Movement Testing
Check caster mounting, free rotation, floor contact and cable clearance before a beginner wheeled robot begins moving.
Read guide2026-10-11 · 7 min read
How to Plan an Emergency Power Disconnect for a Beginner Robot
Plan a reachable, understood way to remove robot power before movement testing, maintenance or unexpected behaviour.
Read guide2026-10-10 · 7 min read
How to Plan a Secure Battery Mount for a Beginner Robot
Plan battery restraint, protection, access and cable routing before a wheeled robot begins moving tests.
Read guide2026-10-09 · 7 min read
How to Plan Cable Strain Relief on a Beginner Robot
Protect robot wiring from repeated pulling, bending and moving joints by planning cable routes and strain relief before testing.
Read guide2026-10-08 · 7 min read
How to Label Robot Wires and Connectors Before Troubleshooting
Create a clear wire and connector labelling system so a beginner robot can be inspected, changed and restored more safely.
Read guide2026-10-07 · 7 min read
How to Create a Safer Test Area for a Beginner Robot
Set up a controlled robot test area with boundaries, an accessible stop method and staged checks before the first moving trial.
Read guide2026-10-06 · 5 min read
How to Choose Fasteners for a First Robot Build
Plan robot screws, nuts, spacers and thread engagement by measuring real parts and following component guidance.
Read guide2026-10-05 · 5 min read
How to Test Straight-Line Drift on a Beginner Wheeled Robot
Investigate wheeled robot drift with a repeatable short test, mechanical checks and documented control changes.
Read guide2026-10-04 · 5 min read
How to Mount Sensors on a Beginner Wheeled Robot
Plan sensor position, field of view, cable routing and repeatable tests before fixing components permanently to a wheeled robot.
Read guide2026-10-03 · 4 min read
How to Understand Gear Ratios for a Beginner Wheeled Robot
Compare robot gearing using output speed, operating limits and the intended task rather than choosing a motor by ratio alone.
Read guide2026-10-02 · 4 min read
How to Route Cables on a First Wheeled Robot
Plan cable routes, labels, strain relief and inspection access before powering a beginner wheeled robot.
Read guide2026-10-01 · 7 min read
How to Choose a Chassis for a First Wheeled Robot
Match chassis size, material, mounting space and access to a beginner robot's components and controlled test environment.
Read guide2026-09-30 · 7 min read
How to Choose Wheels for a First Wheeled Robot
Match wheel diameter, width, grip, mounting and motor torque to the surface and task of a beginner robot build.
Read guide2026-09-29 · 7 min read
How to Choose a Motor Driver for a First Wheeled Robot
Match a motor driver to motor voltage, current, control method and safe testing needs before wiring a beginner wheeled robot.
Read guide2026-09-28 · 8 min read
How to Choose Sensors for a First Wheeled Robot
Match sensor purpose, range, interface and mounting to a simple robot task before buying or wiring components.
Read guide2026-09-27 · 8 min read
How to Choose a Microcontroller for Your First Robot
Compare input and output needs, voltage, programming support and expansion before selecting a controller for a beginner robot.
Read guide2026-09-23 · 8 min read
How to Choose a Power Source for a Beginner Wheeled Robot
Match voltage, current, runtime, connectors and charging arrangements to the real components in a beginner robot build.
Read guide2026-09-22 · 8 min read
How to Document a Robot Build for Easier Troubleshooting
Create a practical robot build record covering parts, wiring, code versions, tests and faults so changes can be understood and reversed.
Read guide2026-09-21 · 7 min read
How to Create a Bill of Materials for a Robot Project
Turn a robot idea into a traceable parts list covering function, specifications, quantity, source and verification.
Read guide2026-09-20 · 7 min read
A Robot Testing Checklist Before the First Full Run
Reduce avoidable surprises by checking structure, wiring, power, software and stop procedures in controlled stages.
Read guide2026-09-17 · 8 min read
How Verified Schools Can Use RoboSkies Standard Robot Training
Understand the approved-school pathway, the six-phase wheeled-robot course and what schools need to provide before learners begin.
Read guide2026-09-14 · 8 min read
How to Plan a Quadruped Robot Build Before Buying Parts
Define movement, joints, power and testing stages for a four-legged robot without letting complexity outrun the project.
Read guide2026-09-13 · 7 min read
Essential Parts for Your First Wheeled Robot
Understand the core components of a beginner wheeled robot before you buy parts or start assembling the chassis.
Read guide